Garage Door Sensor Repair
Restore safe, reliable closing with garage door sensor repair that realigns, tests, and corrects the photo-eyes that keep the door from closing on obstacles.
About the service
Restore Reliable Closing With Professional Garage Door Sensor Repair
When a garage door will not close, or reverses just before it reaches the floor, the safety sensors are a common cause. These photo-eyes sit low on each side of the opening and stop the door if their beam is blocked — so when they drift out of alignment or get dirty, the door treats a clear opening as an obstacle.
We realign and clean the sensors, check the wiring back to the opener, and test the safety reverse so the door closes on command and still protects anything in its path.
- Photo-eyes realigned and cleaned
- Sensor wiring checked
- Safety reverse tested
- Door confirmed closing on command
Why choose us
Why Choose Us For Reliable Garage Door Sensor Repair
We focus on accurate sensor alignment, safe operation, and clear testing so your garage door closes dependably.
Accurate Sensor Alignment
We realign the photo-eyes precisely so their beam lines up and the door stops treating a clear opening as blocked.
Safety-Focused Testing
We test the safety reverse so the door still stops and reverses when something crosses the sensor beam.
Wiring & Connection Checks
We check the sensor wiring and connections back to the opener to rule out a loose or damaged link.
Clear Service Guidance
We explain what was affecting the sensors and what the repair addresses before work begins.
Rick Almeida
Off-track repair
My garage door came off the track and I couldn’t get it to close properly. I called for service and they were able to send someone out quickly. The technician got the door back on track, adjusted everything, and tested it several times before leaving. It’s been working perfectly since. Fast, professional service and a very smooth experience overall.
View on Google
Vipservices Concierge
Springs replacement
My garage door springs broke, leaving the door difficult to open and close. I contacted the company for service, and they responded quickly. The technician replaced the broken springs, balanced and adjusted the door, and tested everything thoroughly before leaving. The entire process was fast, professional, and hassle-free. My garage door has been working perfectly ever since.
View on GoogleWhat we repair
Correct The Sensor Faults That Stop Your Garage Door Closing
Most sensor problems come down to alignment, obstruction or wiring. These are the faults we check and correct.
Misaligned photo-eyes
A knocked or drifted sensor breaks the beam and stops the door closing. We realign both eyes so the beam is true again.
Blocked or dirty lenses
Dust, cobwebs or a stray object across a lens reads as an obstruction. We clean the lenses and clear the beam path.
Loose or damaged wiring
A loose terminal or damaged sensor wire interrupts the signal. We check the wiring and connections back to the opener.
Sensor bracket problems
A bent or loose bracket lets the eye drift out of position. We secure the brackets so the alignment holds.
Know the signs
Recognise The Signs Of A Garage Door Sensor Problem
The safety sensors give clear signals when something is wrong, and reading them early saves forcing a door that is trying to protect the opening. Most sensor faults show up the same handful of ways.
If you notice any of the following on your Franklin-area door, the photo-eyes are worth checking.
- The door starts to close, then stops and reverses
- The opener light blinks or flashes when you try to close
- The door only closes if you hold the wall button down
- A sensor indicator light is off or flickering
- A sensor sits crooked, knocked or hanging from its bracket
Safe by design
Keep Your Garage Door Safe With Properly Working Sensors
The photo-eyes are a safety feature, not an optional extra — they are what stops a closing door from coming down on a person, a pet or a vehicle. A sensor that is bypassed or ignored removes that protection.
We repair and realign the sensors rather than defeating them, then test that the door reverses reliably when the beam is broken, so the door stays both convenient and safe.
See opener repairWhere we work
Franklin and
surrounding towns
From Franklin, MA out to Foxborough, Attleboro and the Route 495 towns. Not sure if we reach you? Call and ask — we will make it work for you.
- Bellingham5 miles
- Medway5 miles
- Wrentham6 miles
- Norfolk6 miles
- Millis7 miles
- Foxborough8 miles
- Milford8 miles
- Plainville8 miles
- Hopedale9 miles
- Walpole10 miles
- Attleboro12 miles
- Mansfield12 miles
Have a question?Call us — we’re happy to help.
I-495I-95BellinghamMedwayWrenthamNorfolkMillisFoxboroughMilfordPlainvilleHopedaleWalpoleAttleboroMansfield
Proudly servingFranklin and surrounding communities
Same great service.
Across every town we cover.
FAQ
Frequently Asked Questions
Why won’t my garage door close all the way?
A door that will not close, or reverses near the floor, is often caused by misaligned or blocked safety sensors. The photo-eyes should be checked and realigned before other causes are considered.
Why is my garage door opener light blinking?
A blinking opener light frequently indicates a safety sensor problem, such as misalignment or a blocked beam. The sensors should be inspected to confirm the cause.
Can dirty sensors stop my garage door from closing?
Yes. Dust or debris on a sensor lens can break the beam and make the door treat a clear opening as blocked. Cleaning and realigning the lenses can restore normal closing.
Is it safe to bypass my garage door sensors?
Bypassing the sensors removes an important safety feature that stops the door closing on people, pets or objects. Repairing and realigning the sensors is the safer approach.
How do you fix garage door sensors that are out of alignment?
We realign both photo-eyes so their beam lines up, clean the lenses, check the wiring, and test the safety reverse to confirm the door closes reliably.
